Hörmann Sectional Garage Doors 2021

Modernisation solutions For special fitting situations Standard fitting Ideally, the available garage has at least 90 mm sideroom. The frame can then be screwed directly into the wall behind the opening. Hörmann sectional doors come with all the necessary fitting materials. Frame support set ■ NEW The plastic profile is fitted between the frame and brickwork. In the case of damp exterior walls, this prevents the transfer of moisture to the frame and effectively prevents the formation of rust. Frame coverings For a harmonious overall appearance, the side frames with frame coverings can be easily adapted to the surface finish of the sections. 55 mm wide frame covering incl. adhesive pads for easy fitting behind the opening, with little sideroom (< 90 mm) 90 mm wide frame covering for fitting in the opening, flush with the wall Special anchor for frame side fixing The sectional door frame can be fitted to the side wall of the garage with Hörmann’s optional, universally applicable anchors. Irregularities in the wall can be easily compensated, leaving the reveal intact. Fitting with up to 35 mm wall spacing Fitting with angled or irregular side wall Fitting with thermal insulation composite system Fitting with non-load-bearing facades (facing brick or thermal insulation) with sideroom of 90 to 125 mm and fixing depths of 160 to 240 mm (depending on the anchor version). 80 DESIGN, EQUIPMENT, ACCESSORIES  | MODERNISATION